I got it all put back together and can't wait to shoot it. Probably Monday when I take my daughter out to shoot her Henry 22 lever action that Santa is bringing. While I had it stripped down I decided to upgrade the scope mounts and rings. I took off the cheap see through scope rings and put on Warne bases and rings. I put my bore sighting laser on last night and it is sitting at dead center left and right but in the 300 yard ring of the BDC. I'm going to leave it there until I can shoot it.

When I put it back together, I bent the rear pin that hold in the trigger housing. I mess with it for about 3 hours trying to figure out why the bolt release button wouldn't spring back to the normal possition after being pressed. It was because the bent pin was binding. I flipped the pin around and it is working better but not like it was. I just called Remington to order a new pin and they won't sell me one because I don't have an FFL. Yes a freaking FFL for a freaking pin!!! Because it is part of a trigger assembly. Stupidest thing I have heard of! A freaking pin!!!! Now I have to have an FFL order me one and pay about 3 times what it cost. The good news is it is operational the way it is. I have before pictures of target so I'll post them and some after the bedding job pictures once they are made.