Well I finally (only took 3 days but seemed like forever!) got it in the mail and couldnt wait to get home to install it. I watched the DVD and then went to work. And as suggested I measured everything from the old rest. I previously changed the sight without any issues so this wasn't as intimidating. I did have to use the horizontal spacer to get some more left to right adjustment ability because the first shots were left (I'm a lefty) of POA and adjusting the sight over I ran out of room. No issues though, pretty straight forward install. Elevation was right on with the arrow lining up with the berger holes and with the 4th arrow I was hitting the bull at 20 yards. I didn't have time to check where my broadheads were flying in relation to the field points cause I didnt have the time last night. But took me about an hour and a half start to finish. Checking 30 and 40 yard hits next, then broadheads... so far so good though.... THe only thing that I have to get used to with this new rest is that the ****ing lever touches my right hand when I grip the bow. Pretty insignificant but something that I have to get used too.. just feels like I'm not high enough on the grip.... Oh and by the way, used the plastic timing cord holder AND served the end, might be a bit of overkill but.... Thanks for all the pointers and "go for it" attitudes!