HuntingNet.com Forums - View Single Post - help with changing cables
View Single Post
Old 04-12-2010, 03:22 PM
  #9  
BGfisher
Nontypical Buck
 
BGfisher's Avatar
 
Join Date: Feb 2003
Location: Middletown PA United States
Posts: 3,625
Default

Bottom cam is over rotated at rest. It's easy to see without even blowing the pictures up. The cable to the lower cam is too short. If you like the draw length where it's at you need to remove some twists from that cable and add some to the cable going to the top cam. Looking at it I'd start with about 3 twists each. Try to use some hole or something on the cam and referrence it to the limb. Get them close to the same and then draw the bow. When you get it right both cams should stop at the same time. Right now they are out of sync.
BGfisher is offline