Originally Posted by
gonewest
I did try it down the mussle and pluged the chamber end so it didn't get into the action. I don't remember reading any of this in the directions. I didn't hve the gun flat. I thought i would fill up the barrel this way and come out the top when filled. I am going to the gun smith tommorrow and see if he can fix this stock. Its not bad it is there and bothers me
You can't plug an end. It builds up pressure and needs pressure to escape. You put the tube in the chamber with the bolt open. You hold tight against the tube to insure good seal. I use a bore guide. One to 3 seconds hold and it will come out the muzzle.