EDIT: OOPS! This is a screw-up. I thought I was posting this in the deer hunting forum. Didn't realize I had switched over to the Black Powder forum.


Here's my home made A-Frame ladder stand. About $60 worth of treated 2x4s, galvanized nuts & bolts, and some EMT tubing. The seat and floor units are angle iron from an old bed frame. The front ladder and back frame are each one piece (nailed and glued). The arm rest, seat unit, floor unit, and cross braces are attached with twenty 1/4" nuts and bolts. I can assemble it and stand it up on-site by myself, but it's a lot easier with two guys. Of course, it's only suitable if you have your own property or a lease.