[quote=TFOX;3403486]
Originally Posted by
dryridge2
We are using the AMO standard that most manufactuers use today.The actuall deflection in which the higher the number,the weaker the spine.
We are not using the new made up spine deflection numbers whick Carbon Express and PSE shaft and some others utilize today where the higher the the number the stiffer the spine.
And....
Originally Posted by
TFOX
I used the numbers given and run them through Archers Advantage.Sometimes AA will require stiffer shafts than OT2 but I have found that they seem to always work with broadheads.I would much rather be on the stiff side than the weak side.I have used OT2 in the past and much preferr AA.
Gotcha, even on the "Hunting" set-up on OT2, I'm seeing a 340 being good, but I agree, too stiff is definitely easier than too weak when trying to get that thing tuned. I've put .340's in my couple of 60# bows and gotten it done, but I'm not even about to try with a .400 in my 72# Katera XL, because I know how that would turnout, and I don't have any hair left to pull out!!!
