MUZZY 3's were consistantly low and left (3 shots) I tried my best to align BH with fletchings
Aligning your blades to your fletch means absolutely nothing. How do you align a 4 blade head to 3 fletch, or two blades to 3 fletch etc..I'll say it again, aligning your blades to the fletch does nothing, physically. Mentally it may aid you. I have never aligned Muzzy's and I've had/have them flying with my field points, as well as with several other heads. Accuracy is in the set up and archer, NOT in the broadhead (most of the time and I say this because the 4 blade MX from Muzzy sucks....lol) Like was mentioned, how well is your bow tuned, do you have matched arrows, did you square your insert alignment, do you have adequate fletch?
Rage 3 blade mechanicals were a 2 inch pattern wth tree arrows at my high left circle on my broadhead target. I switched to my FP's and had the same shot pattern on top right circle on target. Im sold, and am convinced that I will be shooting these this bowseason. I just dontthink there is another, more accurate mechanical BH out there, especially with the cutting diameter and penetration I was getting.
Again, accuracy is in the set up and archer, not in the broadhead. The Rage is no more or less accurate than most any other broadhead on the market in the hands of a competent archer. Now giving you added the penetration and cutting diameter, that statement as some merit. Rages are impressive in their cutting diamter!