HuntingNet.com Forums - View Single Post - .243 chambering problem
Thread: .243 chambering problem
View Single Post
Old 01-19-2009 | 06:20 AM
  #3  
Alaska Bush Man
 
Joined: Dec 2003
Posts: 17
Likes: 0
From:
Default RE: .243 chambering problem
set the sholder back a tad on the case when sizing.........

after adj your sizer die down until it meets your shellholder........go 1/8 turn more and check your brass in your gun......do this until it chambers smooth.
Alaska Bush Man is offline  
Reply
0