HuntingNet.com Forums - View Single Post - target bows?
Thread: target bows?
View Single Post
Old 01-22-2002 | 08:53 PM
  #2  
Martin Man
 
Joined: Feb 2003
Posts: 26
Likes: 0
From: Randolph NY USA
Default RE: target bows?

bowmaster51,

The Martin Cougar is an excellent target bow in any of it's configurations and you already own it. OK, maybe I'm a little biased, but it has been their flagship 3-D target speed bow for several years for good reason. If you are getting blisters, I would assume that you have the rubber grip and not the wood side plates. If you put on the wood side plates, you will essentially be shooting off the back of the riser. Try this with a low wrist grip.

If you want to change bows, you are probably better served by going to the local pro-shops in your area to see the bows and even shoot a few. A couple of generalities to keep in mind if you are looking for a target bow.... a-t-a length should be a minimum of about 38 inches, with longer being better... brace height 7 or more inches... don't over bow yourself, ie. you don't need 70# to impress anyone...

Some companies making good target bows are Mathews, Hoyt, Darton, PSE, Bowtech, Merlin, and many others. Check some out at your local pro-shop.

The IBO links page should take you to several companies web pages.

Good luck!!
Martin Man is offline  
Reply