HuntingNet.com Forums - View Single Post - Tracer Nock, Update (poof done).
Thread: Tracer Nock, Update (poof done).
View Single Post
Old 08-13-2008 | 09:29 AM
  #31  
WesternMdHardwoods's Avatar
WesternMdHardwoods
Nontypical Buck
 
Joined: Feb 2007
Posts: 1,977
Likes: 0
From: Allegany County Maryland
Default RE: Tracer Nock, Update (poof done).
ORIGINAL: Rob/PA Bowyer

ORIGINAL: TFOX

Rob,it may very well be the energy coming from the bow at the shot or even at impact doing a number on the nock.It is packing a pretty good punch.
I agree, especially when the electronics are not supported inside a larger diameter arrow. In a carbon the nock opening is continuous, in the 2413's with unibushing the diameter of the arrow after the bushing isn't supporting the electronics.

Think that's the issue. I would think it would need a bigger Oring on the electronics for a larger diameter shaft but then it wouldn't fit in the unibushing. The unibushing would need taken out, nock installed, oring added and unibushing reinstalled with the nock.

Can't see that happening.


How tough would it be to take the unibushing out Rob? I believe this is going to be the only thing that is going to work with any of the lighted nocks you choose(firenock,tracer,g5,archers flame) they are all going to have the electronics somewhat bouncing around!?! I believe so??
WesternMdHardwoods is offline  
Reply
0