HuntingNet.com Forums - View Single Post - Tracer Nock, Update (poof done).
Thread: Tracer Nock, Update (poof done).
View Single Post
Old 08-12-2008 | 08:46 PM
  #30  
Rob/PA Bowyer's Avatar
Rob/PA Bowyer
Boone & Crockett
 
Joined: Oct 1998
Posts: 18,322
Likes: 0
From: Hughesville, PA USA
Default RE: Tracer Nock, Update (poof done).
ORIGINAL: TFOX

Rob,it may very well be the energy coming from the bow at the shot or even at impact doing a number on the nock.It is packing a pretty good punch.
I agree, especially when the electronics are not supported inside a larger diameter arrow. In a carbon the nock opening is continuous, in the 2413's with unibushing the diameter of the arrow after the bushing isn't supporting the electronics.

Think that's the issue. I would think it would need a bigger Oring on the electronics for a larger diameter shaft but then it wouldn't fit in the unibushing. The unibushing would need taken out, nock installed, oring added and unibushing reinstalled with the nock.

Can't see that happening.
Rob/PA Bowyer is offline  
Reply
0