O.k C 903, first we paper tune with fpts. Get good tears. Now we bareshaft if were going with different shafts to get spine. If they hit the same then we set yardages for fpts. and french tune and minor rest changes a tad there. Paper tune again to make sure. Screw on bhds. and check impact. If youve done all of the above properly, they will hit very close, but usually low out to the longer yardages because of the f.o.c. difference. Come hunting season I will tweak my pins down just a tad. Anyway If there not we move the rest in very small increments to move fpts. and bhds. together. Once thats done paper again to check tears. For me if Ive done all of the above properly tears are still perfect, because the setup of arrow to bow was good. By this time the bow will of course shoot better than I can. Can someone explain how this is middle of the road tuning.