I made mine...Go to Lowes Hardware, pick up a 1 inch diameter, 5ft long pcv pipe and another 5ft long pipe that will slide into the 1 inch (I can't remember if I used 3/4 or 1/2 inch)...

Buy a Tee or a Y for the outer pipe and a cap, caps are optional for the smaller...Wrap both with your camo duct tape and you have a shooting stick...

While standing, you leave the smaller inside the larger and just shoot off the top of the Y...For less elevation, extend the end of the stick further away from you...

To use as a traditional shooting stick, take the smaller out, make your X and hold with one hand at the pivet point, lay your gun in the X and fire away...

If you don't have room to make the X...Shoot off the side of the stick, using your hand as a rest for the gun...