ORIGINAL: buckmaster
ORIGINAL: Marylandbowhunter
Once again it only changes your ANCOR point . The draw length is still the same . You can not change a dl from a longer loop
Ok... You connect your release to the string and draw, anchor and shoot.
Now... you connect your release to a 3/4 D-loop and you Draw, bringing the string back 3/4" more than from connecting straight to the string.
Thus... Changing your Anhor AND overal Draw length.
Right?
Aaron, actually, NO. The draw length of the bow is what it is. If you short change your Ally, it'll take off just as if you creep at full draw. Everyone "usually" draws the bow to the wall and then anchors. The loop is no different. The bow is still at full draw if drawn to the wall and the anchor changes depending on the loop length.
The only time that draw length is compromised according to loop length is on a bow that is not drawn to the wall but no one I know holds a bow at full draw half way to through the valley, or at least they shouldn't.