I bought the bow used and the guy originally had it at 26 inch draw. There are some timing marks on the cams with a magic marker and they were centered when I got the bow. I' m not sure if those were from the factory or from the guy who owned it.

I have some real good landmarks on the cams like the seem where the draw length module meets the cam. From that I can see that the cams at rest are out, but when I draw the bow they both bottom out at the same time. I' m not sure if that' s indicative of a problem or thats just the way it is. When I use a good landmark to put them in time at rest they dont bottom out at the same time, the top cam is late. Should I just set them in time at rest and creep tune from there? Creep tuning is VERY difficult with this bow.

This cut from the Bowtech manual on Dual Cam timing.

" TIMING BowTech dual cam bows are factory synchronized with the cables hitting
the mod walls at the same time, at full draw."

I think I' ll start with that.