ORIGINAL: savage3006
The first thing I would do is to take out the scope and the scope mount. On the Savage, if the screws for the mount are a bit too long, they will hit the bolt. Take that out and see if it helps. It happens too me once, I mounted my scope and sure enough I could not close the bolt. Other than that I cannot see anything else that would get the bolt stuck.
I've seen this as well, I don't know why but the receiver holes are drilled all the way through (at least it is on my Savage) and it's right where the bolt lug engages so you don't notice it until you try to close/open the bot. Make sure it's not binding on the screw.
Good luck and let us know what the culprit is when you get it unstuck.