HuntingNet.com Forums - View Single Post - Red Dot Scope for Deer
View Single Post
Old 03-29-2003 | 08:51 PM
  #12  
propmahn
 
Joined: Feb 2003
Posts: 1,168
Likes: 0
From:
Default RE: Red Dot Scope for Deer

clearance man. i use a 180gr hornady XTP over 15grs of lil' gun. dont know the velocity readout but guessing 1350fps or 1300fps. use a winchester case and a CCI mag primer. though i am switching to winchester primers because of the softer primer since i bought wolff reduced power springs that really lighten up the trigger pull. a good buy at $13 or so. www.gunsprings.com i think.
it is a max load and while i did go over max the accurancy dropped off to 3" -4" at 25yards and the 15gr gives better accuracy.
also i dont crimp the loads in the grooves provided on the bullet, though i do snug them down on the side of the bullet. OAL of 1.66" i believe, it is the max that the GP will take and when i crimped it in the groove accuracy decreased, good figure. experiment a little and see what works best for you.
do the deer a favor and do broadside double lung shots only, no quartering or shoulder shots. in dont know how well they will work and i dont intend to find out. good luck and be patient with the deer i waited 45mins for my shot to line up perfectly
propmahn is offline  
Reply