Help, I'm having problems keeping my blazer vanes glued to my arrows. I'm using a Arizona EZ Fletch with Easton Axis arrows. I've tried two cements - Fast fletch and Fletch Tite Platinum. I've tried lightly sanding the shafts, cleaning them with alcohol(91%), and even an evaporating dregreeser. I bought some stick on wraps, but I still have problems with the vanes popping off when I shoot. I'm shooting a whisker biscuit with a Switchback bow that is tuned up and shooting good groups at 30 yards. I think the fetching is clearing all the bow parts. I had very little of this problem when I was using 4" feathers (I recently switched to Blazer Vanes) I've included some pics. Some times the vane pops totally off, other times it comes off from the front. One time it came loose from the back. Both the index and the hen feathers have popped off. Does any one know a solution - I've thinking I need a new jig. My wife did use my carbon EZ fletch on aluminums. To put more pressure on the vanes, I tried clamping a spring clamp while the glue was setting up but that just pushed the fletching out of alignment. This is driving me crazy