One more thing Kelly, I don't even need a program to tell you your arrows are weak. I just re-read your post and noticed you were using 45/60's with 63lbs of draw weight. That number designation (4560) means the arrrow spines from 45 lbs to 60 lbs, normally at 28 inches with a 100 grn tip. That puts you a bit weak from the get go, but then consider you are using a bit longer arrow (probably not enough to matter though), out of a bow with a very aggressive cam system. Like I have said before, bowtech needs it's own column on the chart. There should be Mild cam, Hard cam, and BOWTECH!! .

Cutting them down a little and dropping some poundage should make them better. That is not going to garuantee you will shoot better though. My 1714's were a bit weak before I cut them down, they still grouped pretty good, just looked a bit funky on the way to the target is all. Broad heads are where you are going to see spine issues really show up and make you pull your hair out.

Again, good luck and I hope you get things figured out.

Paul

P.S. I forgot to tell you, you can e-mail me if you want to BS or something. I was going to give you my address but I forgot to. It is [email protected] . You know your restraunt is right down the road from the factory I work in! Same goes for Paul, just what I need is another freind named Paul, I already have two<img src=icon_smile_big.gif border=0 align=middle> .