Mike i finnaly piddled around today for about 30 minutes ,and came up with a couple possables to hang your archery beards. I was going to do this through PM but thought others might need some ideas as well, and im all for sharing them. One is an old broadhead i painted kahki color with the bleeder removed.I believe it is swaged on the shaft. I leaft about an inch of shaft, drilled a hole in a dowel that fit in the shaft, ran a thin wire through the dowel, crimped the end, glued the dowel in the shaft, and added a bead. The wire fits in the slots that i cut in your hanging bar, and has a small bead on top to keep it from sliding out. I drilled a small hole in the beard (quick) and a pilot hole in the backside of the broadhead in the bleader slot, and used a small machine screw to attach the beard. The other is just wrapped in leather, added a bead, and is hung with the same string that i sent you with a small bead it the top. I made a mini rail so you could see how they would look. If you like either and have seven similar heads, you could ship me the beards and broadheads, i could do em up for ya no charge since i feel i did not quite complete the plaque because of the shotgun hull hangers. let me know!! here are some pics!