Hi SuperRedHawk,
hey if its not to much trouble to check I would really appreciate it, and thanks for your reply. i'll keep an eye for any info. you can provide me, if I set
it up correctly and tried everything suggested and it still doesn't work i may have a faulty camera. But it also may be something simple that I'am doing
wrong as well, just want to be sure. What seems to be happening is, With the camera switch in the off position I move it to ON then scroll to the
setup mode and hit select, at this point i'am in the setup mode, i scroll through the options using the scroll buttons to the option i want then select it
using the select button. The last option in setup mode is IR AIM ON/OFF i scroll to ON and press select button. i then per the owners manual press
the mode button to exit setup mode and select Auto mode, then i move the switch to OFF. i can then move the switch to the AIM position and the
laser does not come on, if i move the switch back to the ON position and scroll back to setup mode and scroll through the options to the IR AIM
ON/OFF option it is back to OFF. This is the reason i thought it might only work in setup mode, but some of the guys using this same camera has
indicated that to use their laser they only have to move the switch back and forth between ON and AIM or OFF and AIM and their laser comes every
time. I have to be doing something wrong or my laser is bad, i have not tried my laser while in the setup mode however, will try that when i pick it
up from the woods next week. Again thanks for the info. and please if there is other gamespy 200 users reading this pass along anything you think
would help.
jbbriggs