19-Official Team Quiet Arrow Thread
08-27-2007 | 07:34 PM
#255
Thread Starter
Nontypical Buck
Joined: Feb 2007
Posts: 2,188
Likes: 0
From: Balt, MD (orig: J-town,PA) The bowels of Hell!!!
RE: 19-Official Team 19 Thread
September 15 here for deer. Dove comes in this Saturday and so does goose. We are thinking about going for goose maybe too. Teal also comes in the same day as archery.
Over the past 3 weeks it seemed like my arrows kept getting lower and lower every time I shot and that I kept having to move my peep up and my sights. So, Sunday I decided to replace my center sering because it was coming apart a little. Well, I measured my nocks for my D-loop and my bottom nock was 13" from my lower speed nocks. This seemed really odd to me so I found my info from the last time and my bottom nock was at 12.125" from the lower speed nocks. My D-loop has sid up almost an inch in less than a month!!!!
So, I replaced my center serving and put my square on the string and placed my lower nock 12" from the speed nock which put my arrow 1/8" above center and had to wait until today to shoot to check everything out.
So, I shot my 50 yd pin at 4 yds and had to adjust my sight back to where it used to be and still ahd a left issue. Here, my QAD had moved to the left about 1/16". However, the barrel didnt' move at all. The steel rod that the flipper screws too has somehow slid out about 1/16".
So, I corrected this issue and here is my results at 35 yds. Check out my nock!!! I'm also going to post some pics from MDBUCKHUNTER and I'd 3D shoot too. Instead of taking wide open shots and also trying to get 12 ring shots we tried for good kill shots.
Over the past 3 weeks it seemed like my arrows kept getting lower and lower every time I shot and that I kept having to move my peep up and my sights. So, Sunday I decided to replace my center sering because it was coming apart a little. Well, I measured my nocks for my D-loop and my bottom nock was 13" from my lower speed nocks. This seemed really odd to me so I found my info from the last time and my bottom nock was at 12.125" from the lower speed nocks. My D-loop has sid up almost an inch in less than a month!!!!
So, I replaced my center serving and put my square on the string and placed my lower nock 12" from the speed nock which put my arrow 1/8" above center and had to wait until today to shoot to check everything out.
So, I shot my 50 yd pin at 4 yds and had to adjust my sight back to where it used to be and still ahd a left issue. Here, my QAD had moved to the left about 1/16". However, the barrel didnt' move at all. The steel rod that the flipper screws too has somehow slid out about 1/16".
So, I corrected this issue and here is my results at 35 yds. Check out my nock!!! I'm also going to post some pics from MDBUCKHUNTER and I'd 3D shoot too. Instead of taking wide open shots and also trying to get 12 ring shots we tried for good kill shots.
08-27-2007 | 07:43 PM
#257
Thread Starter
Nontypical Buck
Joined: Feb 2007
Posts: 2,188
Likes: 0
From: Balt, MD (orig: J-town,PA) The bowels of Hell!!!
RE: 19-Official Team 19 Thread
Guys,
I'm going to create a thread on the bowhunting called baltimore bowmen shoot and post the other pictures.
Josh,
It's always a good time shooting with you buddy. We are getting more on every time.
I'm going to create a thread on the bowhunting called baltimore bowmen shoot and post the other pictures.
Josh,
It's always a good time shooting with you buddy. We are getting more on every time.
08-27-2007 | 09:31 PM
#258
Fork Horn
Joined: Jun 2007
Posts: 380
Likes: 0
RE: 19-Official Team 19 Thread
ORIGINAL: davepjr71
September 15 here for deer. Dove comes in this Saturday and so does goose. We are thinking about going for goose maybe too. Teal also comes in the same day as archery.
Over the past 3 weeks it seemed like my arrows kept getting lower and lower every time I shot and that I kept having to move my peep up and my sights. So, Sunday I decided to replace my center sering because it was coming apart a little. Well, I measured my nocks for my D-loop and my bottom nock was 13" from my lower speed nocks. This seemed really odd to me so I found my info from the last time and my bottom nock was at 12.125" from the lower speed nocks. My D-loop has sid up almost an inch in less than a month!!!!
So, I replaced my center serving and put my square on the string and placed my lower nock 12" from the speed nock which put my arrow 1/8" above center and had to wait until today to shoot to check everything out.
So, I shot my 50 yd pin at 4 yds and had to adjust my sight back to where it used to be and still ahd a left issue. Here, my QAD had moved to the left about 1/16". However, the barrel didnt' move at all. The steel rod that the flipper screws too has somehow slid out about 1/16".
So, I corrected this issue and here is my results at 35 yds. Check out my nock!!! I'm also going to post some pics from MDBUCKHUNTER and I'd 3D shoot too. Instead of taking wide open shots and also trying to get 12 ring shots we tried for good kill shots.
September 15 here for deer. Dove comes in this Saturday and so does goose. We are thinking about going for goose maybe too. Teal also comes in the same day as archery.
Over the past 3 weeks it seemed like my arrows kept getting lower and lower every time I shot and that I kept having to move my peep up and my sights. So, Sunday I decided to replace my center sering because it was coming apart a little. Well, I measured my nocks for my D-loop and my bottom nock was 13" from my lower speed nocks. This seemed really odd to me so I found my info from the last time and my bottom nock was at 12.125" from the lower speed nocks. My D-loop has sid up almost an inch in less than a month!!!!
So, I replaced my center serving and put my square on the string and placed my lower nock 12" from the speed nock which put my arrow 1/8" above center and had to wait until today to shoot to check everything out.
So, I shot my 50 yd pin at 4 yds and had to adjust my sight back to where it used to be and still ahd a left issue. Here, my QAD had moved to the left about 1/16". However, the barrel didnt' move at all. The steel rod that the flipper screws too has somehow slid out about 1/16".
So, I corrected this issue and here is my results at 35 yds. Check out my nock!!! I'm also going to post some pics from MDBUCKHUNTER and I'd 3D shoot too. Instead of taking wide open shots and also trying to get 12 ring shots we tried for good kill shots.
08-28-2007 | 04:43 AM
#259
Thread Starter
Nontypical Buck
Joined: Feb 2007
Posts: 2,188
Likes: 0
From: Balt, MD (orig: J-town,PA) The bowels of Hell!!!
RE: 19-Official Team 19 Thread
The speed nocks didn't move. My entire center serving slid up about an inch. It was my first effort at doing center serving and I didn't pull the ends as tight as I should have and the serving worked loose far enough to allow the slide. all is good now though.
08-28-2007 | 10:23 AM
#260
Fork Horn
Joined: Jun 2007
Posts: 380
Likes: 0
RE: 19-Official Team 19 Thread
Oh so you did your own center serving and had to redo it. And these speed nocks are..?
Aren't they just weights near the cams that supposedly speed it up? How?
And, do you like your treelimb? I need a good quiver.
Aren't they just weights near the cams that supposedly speed it up? How?
And, do you like your treelimb? I need a good quiver.