In my blind faith that my proshop set my bow up right, I didn't even check to make sure everything was lined up properly. Tonight I noticed that if I look at my string from the rear and line it up with my rear stabilizer hole, my Whisker Biscuit is
way off to the left. Lined up that way, the string runs right at the right edge of the hole in the biscuit. Can that be right? I thought you started tuning with the rest lined up with the center of the riser, which is where the stabilizer hole is. Is there something I'm missing? Is it possible that the stabilizer hole on a Legacy isn't in the center and shouldn't be used as a reference? <img src=icon_smile_question.gif border=0 align=middle>
Edit: A little more info... I can shoot groups of 2" or better at 20yds with the bow as it is now (first and only session shooting it so far) and I'll be replacing the Whisker Biscuit with a Muzzy ZE after they come out at the end of January, so this isn't exactly the most critical of problems with the Whisker Biscuit. It will be important when I'm mounting the ZE, though.
Edited by - Jason McCurry on 12/28/2002 02:07:48