NinePines

I figured out the bolt part for anyone who would like to know. There is no way to take it out without removing the barrel from the stock. Once off, there is a thing that looks like a little plastic trigger on the bottom of the plastic endcap. push it and the endcap slides right out. Even without the end cap the bolt would not be able to clear the wood of the stock.
At first I thought that the two little screws on the left side of the receiver were holding in the endcap. The screws are more like plugs and dont go far enough to touch anything. As best I can tell they are for putting a drop of gun oil on the backside of the bolt without having to take the whole rifle apart.