[/align]__________________
Ok Guys I Shoot a
Horton. I have taken the scope off and you can take the rail off under the rail there are two screws attaching the non piviting part to the stock. Remove the back screw and put the piviting part back on. Then put the
dial range to where your 20 line works IE 1 or 2. Then take a long screw and put it right through the piviting part into the stock it will lock the
Dial range where ever you set it before installing the screw. then just use your multi
range and forget the
dial range. That seems to be the best solution and it stays solid for ever.. Good luck
[/align]__________________
[/align][/align][/align]