Duckbutter48
Is the MMP HPH-24 made by Havester or are they a seperate company. I dont know if that is an abreviation oris that a completely different sabot manufacturer
Two different companies
www.mmpsabots.com
http://www.harvesterbullets.com/
If I go with the Crushed Rib from Harvester, do I just need to get the 44cal sabots or are there more then one type of Crushed Rib for the 44cal?
If you go with the Harvester 'Crush Rib' .429/.430 by 50 sabot there is only one for the 44 and one for the 45
It is a complete SOB to get the SST's down the barrel,
Call Connie @ MMP and order a pack of .451 by 50 HPH-24 and one Pack of HPH-3p-ez = these two products will answer your SST problems... If you order or purchase TC shockwaves next time they will come with HPH-24's + you might order a pack HPH 44/50 Green sabots...
How much am I looking at going with the 25acp convo and do yal know where I should order it.
I ordered the breech plug and 100 25ACP shells - seems like it was $70 and you being a reloader will be ablt to prime and reprime the cases
These are made by PR bullets in Canada..
http://www.prbullet.com/swap.htm
Around here Gander Mountain sells them for about 12 bucks for a box of 50, so the price also right.
They are going up as all bullets are.... they are $14 arond here...
You might have to really look at the Shockwave to get the ballistics you need for those long shots...
I am quite confident with my Noslers and Gold Dots to 150/175 yards... 200 would really extend them anything above that I think i would have to look @ the shockwave... do not bypass the 200 grain 10mm shockwave for a thought either...
