You can buy a security box from a department store for $10. 2 eye bolts, 2 hasps. Take the box and cut holes in the front to match the sensor, lens, and flash, on the cam. Drill a hole on each side for the eyebolts. Those are for a ratchet strap to attach the box to a tree. Attach a hasp on top and on the bottom. Also, drill holes on each side, just above the eyebolts. That`s for a python cable to go through. Then camo tape the entire box. When finished you`ll have a lock on top, and 1 on the bottom. Plus the lock that comes with the box. Then take 2 eye screws and put them inside of the door on each side. Your cam goes in between. Then you need a small bungee cord to hold the cam in place.