ORIGINAL: Triple Se7en
What in the world is "super-scrub"?
Sounds like you have a fouled barrel - perhaps using a jag instead of a bore brush& have been using the wrongsolvents to clean with. Use Shooters Choice solvent or Birchwood Casey 2 In 1 Bore Cleaner WITH A BORE BRUSH. Let the first two wet patches with either solvent soak for 15-20 minutes before brushing it out.
Stuff liike "super-scrub" may have an agent in it that makes the bore tacky when it get hot from ignition. What oil are you using for storing puirposes? Also... T/C has two different pre-saturated patches.... one is the very weak T/C 13 -- the other is Bore Butter/Wonderlube 1000 patches. Which one were you using?
Sorry, I forgot the name of the stuff I had, it's called "Quik Scrub". Basically Shooter's Choice versionof Rem Action Cleaner. As far as I can tell, it leaves no residue behind on anything I've used it on. I used it as a last resort to try and remove the Remoil from the barrel.
Believe me guys, I've tried just about everything except running bore butter down the barrel after cleaning the barrel in hot water. I even let some Hoppes Elite Gel soak in the barrel for a few minutes the other nite, brushed it, and ran a few pathes through that came out clean. I gave the barrel a coat of 3 in 1 oil for the time being till I can pick up some bore butter. I'll give in another scalding bath tonite with soapy waterto get the oil out and run some bb patches down there and shoot it this weekend.
The bullets go down the barrel perfectly fine when it's clean.
Sabotloader, I'd like to read your info. on the BB and how you use it. You can pm me with it if you like.
I'm not using the Knight PB's.
Honestly, guys, the only reason I didn't use the BB is because my buddies didn't use it in their guns with PB's. Hopefully it'll help.