Hey guys thanks for all the help. I think I solved the problem(fingers crossed, I'm hoping)with your help. I picked up some 300gr shockwaves and some 777 pellets. I first started with the original 250 gr shockwaves and increased my BM3 to 110gr first 2 shots where perfect, then all hell broke loose and my unreliable shooting continued.

I switched to 300gr shockwaves still using 110gr BM3and my first shot was dead nuts. 2nd shot was 5 inches low to the left. The 3rd shot was high by 9 inchesand to the left. 4th shot was dead nuts. 5th shot was 6 inches low to the right. 6thshot was 3 inches high to the right.

I decided to try the 777. 2 pellets with 300gr shockwave. the first shot was dead nuts. 2nd shot was 1 inch high and a little to the right( but very acceptable. 3rd shot dead nuts. 4th shot dead nuts. and thats all the time I had. I'm very happy at this point as it seems my gun did not care for the BM3. i'll shot more on sat but I'm feeling pretty confident. Man that 777 is dirty compared to BM3. Bm3 requires 1 wet patch and 1 dry and your good to go. 777 required 3 or 4, but hey I would rather deal with that than have a gun that can't shot straight.

another Note i noticed the 300gr shockwaves where pretty hard to get down the barrel, compared to the 250gr.