Ok....I got it all figured out. I would use split limbs similiar to hoyts xt200s. My limb pockets would have sims technology built in. I would use factory installed limb savers. I limbs would be angled a lot.(kinda like the Q2). I would use a highly reflexed carbon riser. It would have about 2 inches of reflex geometry, but still mantain a 7 inch brace height because of the extreme angle of the limbs. This way you get balance and forgiveness. I think I would use a grip simaliar to pearsons 20 degree bio grip, but just a little slimmer at the throat. I would use a cam simaliar to the straightline max cam 2 and versacam. Like the versa cam I would offer somewhere around 4 inches of adjustability without the use of a bowpress. I would also offer let off adjustment from 65 to 80. Hopefully with the carbon riser and split limbs the bow would stay in the low 3 pound range. I say about 35 to 36 inches A-to-A makes a good all around bow. To top it off I would cover it in realtree hardwoods camo. The price tag would be about $650. LoL....anybody ready to buy one. It would be called the Sams ds36. Great all around bow<img src=icon_smile_big.gif border=0 align=middle>