i used a piece of chain link fence to drag in my seed, cleeby. i could not find a cultipacker to rent, so i used a piece of 10'x 9' chain link fence weighted down with long pieces of channel iron. i dragged the plot before spreading the seed and after the seed was spread. this worked out real good. probably would be a good idea to fasten a piece of 2x6 on top of both the front and back of the fence to keep it spread apart. this would make the chain link fence more effective. i did not do this and my fence tended to pull in the center and created an uneven drag pattern. it seemed to work out ok anyway, since my clover came up real good. good luck.