You couldn't pay me to use a dropaway, but lots of guys shooting Hoyts are using them. I'll have to let one of them tell you which ones are adaptable to that cutout Hoyt puts in thier Tec risers. That stinkin' cutout is about the dumbest thing Hoyt's ever done, IMO. A definite pain in the @#$! Or, if you're handy, you could just get a piece of aluminum the same thickness as the cutout depth (about .050" thick), cut it to fit, drill a hole big enough for the mounting bolt to go through, glue it in with contact cement and make it so you can use any rest you want on the bow.