HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Whitetail Deer Hunting (https://www.huntingnet.com/forum/whitetail-deer-hunting-4/)
-   -   Boiling Heads??? (https://www.huntingnet.com/forum/whitetail-deer-hunting/80794-boiling-heads.html)

davidhardegree 11-29-2004 03:06 PM

Boiling Heads???
 
How long do you have to boil a scalp or whole head for mounting? And do you add anything to the water? Anything would help, because I don't know? Thanks.

doughboysigep 11-29-2004 03:08 PM

RE: Boiling Heads???
 
i've never added anything when boiling the scalp. You want to try and get as much meat off the bone as you can before you boil (scalp or head). Once properly boild the remaining meat should come off easily.

Mike01 11-29-2004 03:27 PM

RE: Boiling Heads???
 
I just did this awhile ago. Before you boil do your best to get all the meat off you can. Get the water to a rolling boil and let it sit in there for like 15-20 minutes
After that take the skull out and let it dry. Once dry the remaining pieces of meat just scrapped off real easy for me.

MDManiac 11-29-2004 08:14 PM

RE: Boiling Heads???
 
One more tip: Do it outside if possible (Turkey fryer works great) because it STINKS!! ;)

godzeus 11-29-2004 08:34 PM

RE: Boiling Heads???
 
yes when you boil a head for mounting or euro and salt to the water then add sal-soda ( soda-ash ) boil it for an hour then remove most of all the meat should come off if not repeat boiling for another 15 to 20 min go to www.vandykestaxidermy.com to pick up what you need to do this good luck

charles ray 11-29-2004 10:29 PM

RE: Boiling Heads???
 
i did this to a deer last year, and i used a deep fryer on a camping stove. I brought it to a boil and rigged it to hold the antlers above the water level. After that, i placed the skull into the water and every 45 minutes, add some amount of water to make up for the water that had evaporated. I didnt use salt or salt ash or anything, so it took a little bit longer.

Roost em 1st 11-30-2004 09:22 AM

RE: Boiling Heads???
 
Just did this last weekend. Did one for me a 3 for some others. I skinned mine out and boiled it for an hour or so. Used a 55 gal drum cut down resting on some concrete blocks stacked two high on each side. Built the fire below using some cedar posts too short for fencing. I wrapped tin foil around the base of each antler about 6" up. I put powdered detergent in mine about 1 scoop. Came out great. My buddies didn't skin theirs and I told them I wasn't their taxidermist so I did them skin and all. When you pull the head up and the nose and bottom jaw fall away its close. A stick pushed against the top of the scalp will push the remainder of the hide away when its ready. I never changed the water for the other 3 and they didn't get as white. I'm soaking bleach towels on them now. Careful not to poke the nose area as it is very delicate and prone to crumble.

lhook7 11-30-2004 10:04 AM

RE: Boiling Heads???
 
Try this web site. I did my first one last year using these instructions and it came out very nice.

http://www.southernvisuals.com/LeBou...kull_mount.htm

Bucky10 11-30-2004 12:59 PM

RE: Boiling Heads???
 
I am going to try this, Thanks for the info.

charlie (ky) 11-30-2004 07:48 PM

RE: Boiling Heads???
 
I boiled mine for a couple hours, and I also added two bottles of peroxid. I think it helped to whiten the skull.


All times are GMT -8. The time now is 06:03 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.