Need Info on a Clearwater Power Mag
#1
Spike
Thread Starter
Join Date: Sep 2014
Posts: 2
Need Info on a Clearwater Power Mag
I just recently took up the new hobby of deer hunting and obtained a Clearwater Power Mag from my uncle to use. I had the bow restrung and even though the poundage only goes as low as 65 I can pull it back. The only problem I have is I need the draw length to be about 28-28.5 and right now it is set at 31. I looked in the manual and it said that with those particular cams that is as low as it goes. So I began my search for new cams, which I can not find. I read on another hunting forum that I need a Module B for 28 draw length. I also read that it is possible to use old high country cams. I'm really new at this stuff so if someone could just point me in the right direction it would be much appreciated.
#3
Spike
Join Date: Mar 2014
Location: Pennsylvania
Posts: 98
That company has been out of business for several years. It will be tough to find parts for it. If you swap the cams you will need new strings and cables as well. At the end of the day you'll have more wrapped up in getting this bow to fit you then the bow is worth. Your best bet would be to find another used bow that fits you.