Need 1" Scope rings Weaver HI and Med rise
 

I just got a new gun (yeaaaaa for me ) I need to put a scope on it but the scope is to low what I need are one of each a med and a hi rise 1" scope weaver rings. This is for a shotgun HR ultra sluger the hammer is hitting the scope bad so I need to get a higher rings. Any help would be great Let me know what you have and I buy it - Thanks -

RE: Need 1" Scope rings Weaver HI and Med rise
 

I have some highs for $20 if interested? e-mail me at [email protected]
Mike

RE: Need 1" Scope rings Weaver HI and Med rise
 

email sent

RE: Need 1" Scope rings Weaver HI and Med rise
 

Maybe I am not reading this right, but if I am - I can tell you that you cannot mix and match scope mounts.

You either have to use mid mounts or you have to use high mounts.

You cannot use one mid mount and one high mount on the same scope.

The scope has to be mounted parrallel to the bore of the rifle.

If it is canted up or down, the gun is never going to be accurate at any distance.

RE: Need 1" Scope rings Weaver HI and Med rise
 

I am asking for both sets so I can see if one height is better than the other. I know very well you can't mix match the height. I lap my scope rings once they are set. To make sure there is a even grip on them.

RE: Need 1" Scope rings Weaver HI and Med rise
 

meat-eater i'm 99.9% sure the mediums won't work for you. I know the highs will.

RE: Need 1" Scope rings Weaver HI and Med rise
 

I got the med. ones off ebay Still looking for some HI rings still

RE: Need 1" Scope rings Weaver HI and Med rise
 

Still got some highs if you want a set?

RE: Need 1" Scope rings Weaver HI and Med rise
 

You can close this as I got some while I was in Nashville TN.