|
Turkey sights
What aftermarket sights do yall recommend i look into for a moss 500 28" barell?
|
I like the fiber optic sights on my mossberg mod 935 turkey gun, if I had to replace them I would go for the same thing the factory put on.
|
Originally Posted by Oldtimr
(Post 4292724)
I like the fiber optic sights on my mossburg mod 935 turkey gun, if I had to replace them I would go for the same thing the factory put on.
|
I don't know, they are factory sights, front sight is a long green tube, about an inch and a quarter on a bracket that slides over the barrel rib and the rear sight is two red tubes on a bracket that is screwed to the rib and is adjustable. There is no writing on either sight. Perhaps you could contact Mossberg and ask them what they use. I wouldn't be surprised if there were after market sights of the same configuration. In the link, the sights on the left are the turkey gun sights, that red on both sides with the green in the center really catches your eye in dim light. http://www.mossberg.com/category/series/935-magnum/
|
Originally Posted by Oldtimr
(Post 4292730)
I don't know, they are factory sights, front sight is a long green tube, about an inch and a quarter on a bracket that slides over the barrel rib and the rear sight is two red tubes on a bracket that is screwed to the rib and is adjustable. There is no writing on either sight. Perhaps you could contact Mossberg and ask them what they use. I wouldn't be surprised if there were after market sights of the same configuration. In the link, the sights on the left are the turkey gun sights, that red on both sides with the green in the center really catches your eye in dim light. http://www.mossberg.com/category/series/935-magnum/
|
I used the Truglo magnum gobble dot for years. It's an adjustable fiber optic sight. As I got older and my eyesight went south, I switched over to a Fast Fire red dot. ( FF3) Fantastic sight with very good customer service.
|
Originally Posted by RPD63
(Post 4292754)
I used the Truglo magnum gobble dot for years. It's an adjustable fiber optic sight. As I got older and my eyesight went south, I switched over to a Fast Fire red dot. ( FF3) Fantastic sight with very good customer service.
|
Red dot scopes like the FF3 can be mounted on most any type of shotgun. If your gun is drilled and tapped it can be done pretty easy. My Nova was not drilled and tapped so I had to do it myself or I could of taken it to a gunsmith. A saddle mount is another option as is the speed bead set up....both of which don't require a drilled and tapped receiver. Check out the Burris website if you wanted more info. Truglo also makes a good red dot.
|
Originally Posted by RPD63
(Post 4292760)
Red dot scopes like the FF3 can be mounted on most any type of shotgun. If your gun is drilled and tapped it can be done pretty easy. My Nova was not drilled and tapped so I had to do it myself or I could of taken it to a gunsmith. A saddle mount is another option as is the speed bead set up....both of which don't require a drilled and tapped receiver. Check out the Burris website if you wanted more info. Truglo also makes a good red dot.
|
I have used Tru Glo. The main reason to use sights. It forces you to keep your head down.
Stay away from any magnetic mounts. You will loose them. The Tru Glo I used allowed for windage and elevation. They used a hex screw to clamp to the vent rib. Simple to put on or off. I have also used the Tru Glo that uses a plastic wedge to lock the sight body in place. Those are nice too. Know the thickness of your vent rib as there are different models. Used those for years until my old eyes could not adjust. Now use a scope with a diamond reticle. |
| All times are GMT -8. The time now is 10:03 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.