to my surprise i emailed moultrie for some displays..i got an email that said buy another one its cheaper..then a 2nd email askin for my address so they could mail me some..they came in 2 days ...with an eyeglass screw driver i opened it up, be sure to remove the screws holdin down the back up battery system and the screws for the solar panel hook up inside next to the 6V battery compartment befor takin front cover off...a few black screws around the edges hold down the green board..be sure to lift the top green board off befor tryin to remove the bottom as there are more screws than you can see with the top green board on...there is also a plug connect between 1st board and 2nd board easy to see from an angle...as well as another from the 2nd board to the display which is screwed down as well...basically monkey see monkey do..remember the stainless screws go on the solar panel red and black.if ya have flash then make sure the hot glue holds it in place i had to re-hot glue one cam and i lost backup battery power from the board but it'll be fine....