Moultri 3.1
09-10-2007 | 02:04 PM
#1
Thread Starter
Fork Horn
Joined: Jan 2004
Posts: 116
Likes: 0
From: Briercrest, Saskatchewan
Moultri 3.1
Hey guys,
I havea moultrie 3.1, right out of the box it would not take a picture. It doesn't take a picture in manual or auto mode. All diagnostics indicate "OK". The event counter will only go up by one then stop until the unit is powered down then back up again, only then will the event counter go to 2 when the sensor is tripped( then it is stuck again until the unit is powered up again). Just wondering if anyone else has experienced this and could help me out. I called there 1 800 #, but it can't be reached in my service area ( i'm from Canada). So I called them in Alabamba directly but have been on hold forever and am not getting through. Thought I would see if anyone on here could help.
Thanks,
JPF
I havea moultrie 3.1, right out of the box it would not take a picture. It doesn't take a picture in manual or auto mode. All diagnostics indicate "OK". The event counter will only go up by one then stop until the unit is powered down then back up again, only then will the event counter go to 2 when the sensor is tripped( then it is stuck again until the unit is powered up again). Just wondering if anyone else has experienced this and could help me out. I called there 1 800 #, but it can't be reached in my service area ( i'm from Canada). So I called them in Alabamba directly but have been on hold forever and am not getting through. Thought I would see if anyone on here could help.
Thanks,
JPF
09-10-2007 | 02:48 PM
#3
Nontypical Buck
Joined: Feb 2007
Posts: 1,642
Likes: 0
From: North Central Iowa
RE: Moultri 3.1
I would check out there website. I think it's www.moultriefeeders.com (i think) You should try that if you cant get somone on the phone.
09-11-2007 | 01:33 PM
#5
Fork Horn
Joined: Apr 2004
Posts: 381
Likes: 0
RE: Moultri 3.1
While you are trying to get in touch with Moultrie, which you should definitely do, I would keep it turned on in the house where there is a lot of activity and see what it continues to do. With our two older Moultries you almost have to coax them to take your picture.
You might also make sure you have a good battery. The older model Moultries we used didn't perform well for long on alkaline batteries even though they said there was still battery life left, but we get good life out of the rechargeable 6 volt batteries.
You might also make sure you have a good battery. The older model Moultries we used didn't perform well for long on alkaline batteries even though they said there was still battery life left, but we get good life out of the rechargeable 6 volt batteries.
09-11-2007 | 07:02 PM
#7
Spike
Joined: Jul 2006
Posts: 75
Likes: 0
From: St. Petersburg, FL
RE: Moultri 3.1
ORIGINAL: JPF
Hey guys,
I havea moultrie 3.1, right out of the box it would not take a picture. It doesn't take a picture in manual or auto mode. All diagnostics indicate "OK". The event counter will only go up by one then stop until the unit is powered down then back up again, only then will the event counter go to 2 when the sensor is tripped( then it is stuck again until the unit is powered up again). Just wondering if anyone else has experienced this and could help me out. I called there 1 800 #, but it can't be reached in my service area ( i'm from Canada). So I called them in Alabamba directly but have been on hold forever and am not getting through. Thought I would see if anyone on here could help.
Thanks,
JPF
Hey guys,
I havea moultrie 3.1, right out of the box it would not take a picture. It doesn't take a picture in manual or auto mode. All diagnostics indicate "OK". The event counter will only go up by one then stop until the unit is powered down then back up again, only then will the event counter go to 2 when the sensor is tripped( then it is stuck again until the unit is powered up again). Just wondering if anyone else has experienced this and could help me out. I called there 1 800 #, but it can't be reached in my service area ( i'm from Canada). So I called them in Alabamba directly but have been on hold forever and am not getting through. Thought I would see if anyone on here could help.
Thanks,
JPF
