Rebuilt Lyman GPR
08-12-2017, 08:39 AM
#1
Banned
Thread Starter
Join Date: Dec 2008
Location: Boncarbo,Colorado
Posts: 9,186
Rebuilt Lyman GPR
My friend and I at rendezvous earlier this year, found an old beat to hell GPR and after some talking, I told my friend to make him an offer. He ended up with the rifle and we did our survival walk and we took first. He missed twice with the new rifle, but still, we had a blast.
I spent a lot of time on the barrel. The last own, rusted it up badly to the point I actually had to spend 1 to 2 hours on EACH barrel flat and draw file the surface smooth again.
The wood was roughly shaped. I wasn't able to do a whole lot with the lock panels as the owner had take a lot of wood out, but I at least got them into shape and clean looking.
For the barrel/tang I used LMF browning solution and all the other smaller parts I hit with birchwood casey plum brown, including the lock and hammer.
The stock had a ton of white sap wood by the tang and lock area, so I had to use birchwood casey walnut stain and stain that area with a few coats, then hit the entire stock with dixie gun works antique gun finish stain which is a reddish brown.
My friend went crazy over the color. For once, he called something beautiful, and I agreed :lol!:
He ordered a bunch of parts/accessories once we finished up shooting. The rifle is dead on at 50 yards which surprised the hell out of me as I just centered the sights as best I could. Makes it a heck of a lot easier when things go that smooth.
One thing I never noticed in the past... The GPR has a REALLY short LOP! I measured this one at 12.5" LOP.
I spent a lot of time on the barrel. The last own, rusted it up badly to the point I actually had to spend 1 to 2 hours on EACH barrel flat and draw file the surface smooth again.
The wood was roughly shaped. I wasn't able to do a whole lot with the lock panels as the owner had take a lot of wood out, but I at least got them into shape and clean looking.
For the barrel/tang I used LMF browning solution and all the other smaller parts I hit with birchwood casey plum brown, including the lock and hammer.
The stock had a ton of white sap wood by the tang and lock area, so I had to use birchwood casey walnut stain and stain that area with a few coats, then hit the entire stock with dixie gun works antique gun finish stain which is a reddish brown.
My friend went crazy over the color. For once, he called something beautiful, and I agreed :lol!:
He ordered a bunch of parts/accessories once we finished up shooting. The rifle is dead on at 50 yards which surprised the hell out of me as I just centered the sights as best I could. Makes it a heck of a lot easier when things go that smooth.
One thing I never noticed in the past... The GPR has a REALLY short LOP! I measured this one at 12.5" LOP.
Last edited by MountainDevil54; 09-23-2018 at 12:28 PM.
