HuntingNet.com Forums - Warf Project

Page 3 of 3

Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Traditional Archery (https://www.huntingnet.com/forum/traditional-archery-19/)

- - Warf Project (https://www.huntingnet.com/forum/traditional-archery/237696-warf-project.html)

burniegoeasily

03-19-2008 06:15 AM

RE: Warf Project

This site might help you with the lam delima.

http://www.stickbow.com/FEATURES/BOWBUILDING/startbuilding.CFM

Jasonlester

03-19-2008 03:54 PM

RE: Warf Project

Quote:

ORIGINAL: Redneck Bowhunter

So, you didn't use any fiberglass in your limbs it is just wood? And how did you glue it all up with that tapered peice in there?

Actually all I have made are selfbows. I haven't made any recurves limbs like that.

If it were me I'd try gluing up the limb up to where the tapered block would be. Stop the fiberglass there (see pic) Then once thats dry glue on the block and shape as needed.

Or you could make your form to glue it all together all at once.

Redneck Bowhunter

03-20-2008 09:38 PM

RE: Warf Project

Sweet, thanks again guys

Redneck Bowhunter

03-22-2008 03:22 PM

RE: Warf Project

Well, after putting a lot of thought into this, I have decided to put this project on the back burner for a little bit. I have decided to try and make a recurve bow with a Bingham project plan first. Then after I have that experience, I will try making the limbs for my riser.

burniegoeasily

03-25-2008 07:17 AM

RE: Warf Project

Quote:

ORIGINAL: Redneck Bowhunter

Well, after putting a lot of thought into this, I have decided to put this project on the back burner for a little bit. I have decided to try and make a recurve bow with a Bingham project plan first. Then after I have that experience, I will try making the limbs for my riser.

Sounds like a good plan.;)

All times are GMT -8. The time now is 04:16 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page