HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Traditional Archery (https://www.huntingnet.com/forum/traditional-archery-19/)
-   -   begginer info (https://www.huntingnet.com/forum/traditional-archery/234347-begginer-info.html)

bowfisherman 02-24-2008 06:17 PM

begginer info
 
I have shot coumpounds for years but am interested in shooting a recurve. My friend gave me a bow. I am clueless so I have a few questions. What types of arrows (carbon,aluminum,wood), feather/vanes,broadheads, and sights do you use? Sorry for the dumb questions but I do not know where to start.

wabi 02-24-2008 06:52 PM

RE: begginer info
 
I'm leaning more toward carbons these days. For my trad bows I like GrizzlyStik tapered carbons, and I use feathers only for the trad bows. Broadheads come down to personal taste, but you do want a good cut-on-contact head. I like Magnus Snuffers and G-5 Montecs,and you might get the idea I like 3 blade heads. ;)
As for sights, never used them except on a compound, and I even shoot the compound "instinctively" now, so I can't help there. [&:]

Cessna Flyer 02-25-2008 03:07 AM

RE: begginer info
 
For your recurve, if you install a elevated rest then you can shoot vanes, but if you shoot off the shelf use feathers. Carbon arrows are in, but for just starting out, use Aluminum if you wish, you will need to match the arrow to the bow, what draw weight is the bow? and what is your draw length with that bow? NOT YOUR COMPOUND they are two different animals. BroadheadsI would use a fixed two to three blade, I wouldn't use any of the expandables. Sights, that is up to you, some install a three to four pin type sight, but most don't use a sight so to say.

bigcountry 02-25-2008 08:32 AM

RE: begginer info
 
Its all about preference. I prefer cedars for some of my bows, and aluminums for others. Alum's are easier to tune than carbons IMO. You have more choices of spine. Also, I require at least 10gr/lb draw, and thats hard to get with most carbons. It can be hard to get with aluminums. And wieght tubes are expensive.

If I go the carbon route with my recurves this year, I am going to try gold tip trad arrows and use thier wieght system to get at least 550gr-600gr.

rybohunter 02-25-2008 10:19 AM

RE: begginer info
 
bigcountry

CX heritage arrows with 100 gr inserts might get you in the range you want without weight tubes. I just set mine up for a 58# longbow. 125gr point + 100 gr insert & 29" arrow (250) gives me a 582 gr total weight. Flies beautifully.

bowfisherman 02-25-2008 12:43 PM

RE: begginer info
 

ORIGINAL: Cessna Flyer

For your recurve, if you install a elevated rest then you can shoot vanes, but if you shoot off the shelf use feathers. Carbon arrows are in, but for just starting out, use Aluminum if you wish, you will need to match the arrow to the bow, what draw weight is the bow? and what is your draw length with that bow? NOT YOUR COMPOUND they are two different animals. BroadheadsI would use a fixed two to three blade, I wouldn't use any of the expandables. Sights, that is up to you, some install a three to four pin type sight, but most don't use a sight so to say.
thanks for the info guys. I would like to shoot off the shelf. The draw weight is 47 lbs. Not sure how to find my draw lenght for a recurve.

jamesw319 03-12-2008 04:59 PM

RE: begginer info
 
:eek:start off with carbon,,5 in feathers,hellical..durable will hold up to the many mistakes,,then consider other materials


All times are GMT -8. The time now is 05:00 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.