![[Deleted]](https://www.huntingnet.com/forum/iconimages/traditional-archery/deleted_ltr.gif)
[Deleted]
01-12-2003 | 04:37 PM
#2
Boone & Crockett
Joined: Feb 2003
Posts: 15,295
Likes: 0
From: Mississippi USA
RE: Help
Good qustion--lol. Most likely it will be around 3" shorter than the bow length--that would be where to start anyway. Check brace height and adjust from there.
Chad
Long Bows Rule!
Chad
Long Bows Rule!
01-12-2003 | 06:13 PM
#3
Joined: Feb 2003
Posts: 464
Likes: 0
From: Windsor Locks CT USA
RE: Help
Depending on the bow design could be 1 to 3 inches shorter than the bow. Found this out with the 5 bows I just got. Get with LBR (Chad), our fearless moderator, at [email protected]. HE makes strings and could twist you up several to try. His prices are very reasonable, and you can pick the colors, I've already bought 5 or 6 strings<img src=icon_smile_big.gif border=0 align=middle>
01-12-2003 | 07:12 PM
#5
Nontypical Buck
Joined: Feb 2003
Posts: 1,097
Likes: 0
From: Goose Creek SC
RE: Help
A good starting point would be to take a tape measure and measure the length from nock to nock along the backside of the bow, then subtract 3" from that measurement. A string of that length should be in the ballpark.
Bill
Praise the Lord, He is worthy
Bill
Praise the Lord, He is worthy
