![]() |
NEW TO TRADITIONAL NEED HELP
I've just purchased a Sequoia long bow #55 @ 28" and I've decided to go with the Easton AXIS ST arrows. My only delima is which broadhead is going to be the most efficient on whitetails? I have been a longtime bowhunter (20yrs) however, it has been with a compound bow. Over the years I've had great success with this set up but I've allways wanted to try traditional. Any info would be greatly appreciated.
|
RE: NEW TO TRADITIONAL NEED HELP
2-blade and 3-blade cut-on-contact heads have pretty much been the standard for traditional hunters.And there's so many good ones out there it's hard to pick one.Some to look at are Zwickey,Magnus,Steelforce,Ace,Razorcaps,Wensel Woodsman's and don't forget about the old Bear Razorheads(one of my favorites).Lately I've been using Magnus Stinger 125gr.They're scary sharp,tune easily and fly great
|
RE: NEW TO TRADITIONAL NEED HELP
Thank you sir, I was under the impression that the cut on cantact was the way to go. I've heard alot of good things about the magnus aswell as the steel force and the zwickey, so I guess I'll just buy and try. Thanks again!
|
RE: NEW TO TRADITIONAL NEED HELP
Any one shot the woodsman BH. I like them and how they can come in screw on type 150 gr. head. Do they fly true, sharp, tune well?
|
RE: NEW TO TRADITIONAL NEED HELP
ORIGINAL: BILLY BULLDOG I've just purchased a Sequoia long bow #55 @ 28" and I've decided to go with the Easton AXIS ST arrows. My only delima is which broadhead is going to be the most efficient on whitetails? I have been a longtime bowhunter (20yrs) however, it has been with a compound bow. Over the years I've had great success with this set up but I've allways wanted to try traditional. Any info would be greatly appreciated. |
RE: NEW TO TRADITIONAL NEED HELP
That brings up another question that I have, roughly, how heavy should I be as far as total arrow weight? As of now I'm looking at approximately 400 grains. Thats if I go with a 100 grain broadhead. Now with that said, I normally shoot about 360grains finished product out of my Bowtech Allegiance VFT with out any issues. I realize that I'm comparing apples and oranges but it's all that I know at this point. I'm still stuck in the highspeed world, but I would like to keep my speed up as much as possible without compromising penetration. If that makes any sense.
|
RE: NEW TO TRADITIONAL NEED HELP
ORIGINAL: BILLY BULLDOG That brings up another question that I have, roughly, how heavy should I be as far as total arrow weight? As of now I'm looking at approximately 400 grains. Thats if I go with a 100 grain broadhead. Now with that said, I normally shoot about 360grains finished product out of my Bowtech Allegiance VFT with out any issues. I realize that I'm comparing apples and oranges but it's all that I know at this point. I'm still stuck in the highspeed world, but I would like to keep my speed up as much as possible without compromising penetration. If that makes any sense. |
| All times are GMT -8. The time now is 12:48 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.