How many don't use brass nocksets?
#15
RE: How many don't use brass nocksets?
I'm considering dropping my brass nocks for a tied in one and an eliminator button. . Right now my string is really messy and I been thinking to tidy it up.
#16
RE: How many don't use brass nocksets?
I've found that a tied in nock with a string loop around it works best for me. The tied in nock sits on the inside top portion. Without it my string loops have a tendancy to pinch the nock over time.
BTW, the brass nocks towards your cam (speed nocks) are good for at least 2fps. Might want to leave them there
BTW, the brass nocks towards your cam (speed nocks) are good for at least 2fps. Might want to leave them there
#19
RE: How many don't use brass nocksets?
I have 2 of them setup 4 1/2" from my axle per Bowtech's recommendation to help gain a bit of speed. Other than that I have a tied in nock above the bottom knot in my loop, as well as the loop itself. This combo works great.
#20
RE: How many don't use brass nocksets?
I tie two nocks with BCY polygrip .020 serving and then tie my loop over the outside. I feel it gives me the best support for my arrow nock as well as keeps the string square/parallel to the riser when at full draw. The arrow nock never comes off even if I draw and let down 100 times in a row. I just put the arrow on and it won't come off until I shoot or take it off.