arrow contact on rest; solution? please help, pic included
03-28-2005 | 09:13 AM
#1
Thread Starter
Joined: Dec 2004
Posts: 252
Likes: 0
From: Alabama USA
arrow contact on rest; solution? please help, pic included
My bowshop recently put this trophy taker rest on for me and covered the rest with the silent material. I noticed the other day that it was tearing. I assume this is from arrow contact. I'm shooting tomkat 70lbs. left handed, 27inch DL, golttip xt's 26inches 5575, with 100 grain points. My vanes are what come on the arrows, 4inch helicals I believe. Sorry the pic is so big, I'm not good @ posting pics. Any suggestions?
03-28-2005 | 02:20 PM
#2
Nontypical Buck
Joined: Feb 2003
Posts: 3,625
Likes: 0
From: Middletown PA United States
RE: arrow contact on rest; solution? please help, pic included
Looks like you may have one or several problems. First you need to replace the moleskin on the rest. You can get some at the shop or just get good ole Dr. Scholls from the pharmacy. There may be several reasons it is only wearing on the one side. Upon release the rest doesn't drop right away if set up properly. At this point the arrow could be bending in toward the riser due to a stiff spined arrow or incorrect centershot placement. And/or the nocking point copuld be off drivng the arrow into the rest upon release. I suggest you replace the moleskin and try paper tuning if you haven't done so already.
03-29-2005 | 07:32 AM
#8
Thread Starter
Joined: Dec 2004
Posts: 252
Likes: 0
From: Alabama USA
RE: arrow contact on rest; solution? please help, pic included
MOBO, THAT IS A GOOD THOUGHT BUT I'VE ONLY SHOT IT PROBABLY 20 TIMES SINCE IT WAS PUT ON. COULD IT MY ARROWS TEAR IT LIKE THAT FROM THAT FEW OF DRAWS.
03-29-2005 | 11:11 AM
#9
Joined: Mar 2004
Posts: 13,082
Likes: 0
From:
RE: arrow contact on rest; solution? please help, pic included
Sure. Why not? All it takes is one small tear, and every draw can make it worse. I just ordered one of these rests, so I am going to find out more. I understand that by putting that on the rest itself, it eliminates the noise of the arrow, but also deadens the noise of the rest hitting the bow shelf. How would it be without the moleskin on the rest, and on the shelf only?
03-29-2005 | 10:00 PM
#10
Joined: Feb 2003
Posts: 337
Likes: 0
From: Oakland Md. USA
RE: arrow contact on rest; solution? please help, pic included
I had the same prolem with my Trophy Taker. The rest would not drop fast enough
for vane clearance no matter what I tried. I ended up selling the rest. The only
suggestion I have is to try feathers which will be more forgiving if there is contact
upon release. Some here have good luck with this rest and some don't.
for vane clearance no matter what I tried. I ended up selling the rest. The only
suggestion I have is to try feathers which will be more forgiving if there is contact
upon release. Some here have good luck with this rest and some don't.
