RE: Tell me about your Allegiance
 

On my Allegiance there is no lean, top or bottom cam at full draw;)

RE: Tell me about your Allegiance
 

OK, this is isn't answering my question, LOL (or I don't understand inside and outside). Does the top center cable cross to the LEFT or RIGHT of the lower cable (for RH bow)? It could be set either way.

RE: Tell me about your Allegiance
 

The wife's Defender came out of the box with the top cable (center cable track on the top cam) crossing on the inside of the bottom cable, or to the left, while holding the bow in front of you on a right handed bow. I changed my Allegiance to the Defender's rigging and did see a marked improvement in cable torque. I had to turn the slide upside down to match the Defender's slide (with the long slot towards the riser) to gain the necessary clearance between the cables. Both cables still cross below the guard rod:D

RE: Tell me about your Allegiance
 

Thanks gimpy for the clarification:D.

RE: Tell me about your Allegiance
 

Walks with gimp came you post a pic Please ???

RE: Tell me about your Allegiance
 

WWAG--you've got one of the better ones for sure--wanna to get some limbs with the 'red & silver' swirl :D.

RE: Tell me about your Allegiance
 

Blodg, the top center cables crosses to the 'left', below the cable rod.

RE: Tell me about your Allegiance
 

Thanks to ampahunter and WWAG as I may have found my problem. My top center cable crosses to the right of the other cable. That may be why I had to cross the cables above the muzzy slide to keep them from rubbing together. Tomorrow I will throw her into the press and swap them to see if I can get the cables back below the cable rod. Almost hate to mess with it though, she shot sweet today with a 300/53X for my 2nd 5 spot round (and 1st with the MZE).

RE: Tell me about your Allegiance
 

Ok,, just don't be asking me about the arrow rest, I don't have time to make any right now:(:D

RE: Tell me about your Allegiance
 

We'll try a little bigger.