|
RE: Want Gold Tips, but...
I shoot the 7595 3D Pros cut to 28.5 and fletched with 3 4" feathers. I use 125 grain Stingers. My bow is setup at 65#'s and these arrows fly beautifully. This should be very close to the weight you want and they do pack a PUNCH, especially with those Stingers.
JMAC PS Forgot to add, I have used the weedeater string too (when I had 5575's), and it works great. |
RE: Want Gold Tips, but...
I shoot the 7595 3D Pros cut to 28.5 and fletched with 3 4" feathers. I use 125 grain Stingers. My bow is setup at 65#'s and these arrows fly beautifully. This should be very close to the weight you want and they do pack a PUNCH, especially with those Stingers. |
RE: Want Gold Tips, but...
Jmac I am glad to hear that your setup works. I will be cutting my to either 28.5 or 29. I am also thinking about the 125 head instead of the 100.
Contenderman I do not know anywhere around here that sells them. I was actually planning on ordering them from eders.com. They have them for $89.50 for the Hunter Pro's in camo. The camo is 9.7 gpi and the black are 8.6 gpi. The black are $79.50. Both prices are for the raw shafts. Has anyone had problems ordering arrows from eders? |
RE: Want Gold Tips, but...
ORIGINAL: Rangeball Doesn't GT have some type of internal weighting thingy? I was thining they did... As far as too stiff, you'll hear both sides, but in my experience, if you are shooting a release and a center shot bow, too stiff is no problem whatsoever, and in fact can even be better as the arrow quits vibrating quicker. That's what Bob Ragsdale thinks too... :) |
RE: Want Gold Tips, but...
I think the guys already gave you all the good answers: 7595's are fine for your setup. I now shoot 28.5" 7595's with a 63# bow and they group perfectly with my 100gr WASPs out to 50 yds.
I am shooting the same rig (with fieldpoints) for 3D, but will try some 75 gr tips to get the weight down a bit this weekend. Pushing the FOC, but hopefully she shoots ok.... Cheers, Greg |
RE: Want Gold Tips, but...
Ive only ordered arrows from eders once. They did a fine job on the arrows I got which
were the Gold Tips. They seem like good people to deal with. JMHO |
RE: Want Gold Tips, but...
Thanks dsheally. That is pretty much what I have heard on other threads. Guess all I need now is the money to get them ordered.
|
RE: Want Gold Tips, but...
ORIGINAL: jmac_or I shoot the 7595 3D Pros cut to 28.5 and fletched with 3 4" feathers. I use 125 grain Stingers. My bow is setup at 65#'s and these arrows fly beautifully. This should be very close to the weight you want and they do pack a PUNCH, especially with those Stingers. |
RE: Want Gold Tips, but...
I've had 3 setups shooting 65lbs and I never could get the 5575's to tune worth a ship. The 7595's have been perfect for paper tuning and bare shaft tuning. Same with the Beman ICS's , the 340's shoot much better. I have a 29 1/2" draw and shoot 29" arrows.
|
| All times are GMT -8. The time now is 03:19 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.