RE: BowTech Allegiance!!
 

Makes you wonder what kind of K.E. you would get with a 100 lb. Allegiance set at the longest draw length[:o]

RE: BowTech Allegiance!!
 

Cougar,

The Allegiance is right between 33 and 34 inches in axle to axle length with a 6 7/8 inch-7 inch brace height. The Defender is between 31 and 32 inches in axle to axle length with a 7.25-7.5 inch brace height. What you are basically looking at are the Patriot and Mighty Mite VFT with the new cam system installed...plus one or two upgrades on components if memory serves me.

Letoff is adjustable on both models from 65 to 80%.

RE: BowTech Allegiance!!
 

WWAG,
Do the cams have any type of timing/ reference marks on them ? Just curious as to how to check and what the manual says.

RE: BowTech Allegiance!!
 

After the bows are built and tested through the chronograph, the tester draws timing marks on the cams as one of the last steps in the 73+ checks performed before the bow gets packaged up and shipped to the dealers.

If the marks are removed for whatever reasons there's also a specific measurement for each bow as well.

RE: BowTech Allegiance!!
 

It seems as though WWAG's bow is right in line with my demo.

For those that missed the thread by Rangeball a couple weeks ago the specs and speeds I got from mine were;

The tested specs are 28" draw (2" short of AMO speed testing), 61 lbs.

301 grain A/C/C- 305 fps., 306 fps., 306 fps.

349 grain Gold Tip- 295 fps., 296 fps., 293 fps.

398 grain A/C/C- 271 fps., 270 fps., 272 fps.

536 grain 2117- 236 fps., 237 fps. and 237 fps.

RE: BowTech Allegiance!!
 

I got three chrono readings of 319 fps this morning with a 301.4 grain arrow before it started doing some weird things like reading .3LE and .3LC. I think it was freezing up at + 8 degrees,,, I gave up and ran back in the house[:@]

RE: BowTech Allegiance!!
 

Russ.

Can you do me a favour and not mention this bow and how well it shoots again:)

Well atleast untill I get the call from the Pro Shop telling me mine has arrived:D

Your killing me here Bud;)

RE: BowTech Allegiance!!
 

OK,, I won't share anymore,,,,,,,,,,,,,, NOT:D

RE: BowTech Allegiance!!
 

Thanks for the info Bowtech_Shooter. The I cam on my 02 Mighty Mite was marked the same way.

RE: BowTech Allegiance!!
 

Geeeeeees! You guys are just killing me! Now I'm thinking about a 60 lb. Allegence. Do you think a 70 lber turned down to 65 will still perform, or will it lose some performance?

Just dieing! Gotta shoot one!