Something to Ponder
#11
Josh,
Unfortunately no the Allegiance only comes in a 30" top end..........BUT the Old Glory DOES come in a 31" draw length.
It's 37 1/4" ATA Vs the 33 5/8" so really it's only a little over 1" ATA longer on either end, and a bit larger brace height at 7 1/4".......IBO speeds are just a tad behind the Allegiance at 315-323. That might be the bow for you if you want to kill tanks, or buildings, or entire hillsides or something?
[:-]
Unfortunately no the Allegiance only comes in a 30" top end..........BUT the Old Glory DOES come in a 31" draw length.
It's 37 1/4" ATA Vs the 33 5/8" so really it's only a little over 1" ATA longer on either end, and a bit larger brace height at 7 1/4".......IBO speeds are just a tad behind the Allegiance at 315-323. That might be the bow for you if you want to kill tanks, or buildings, or entire hillsides or something?
[:-]
#12
Joined: Feb 2003
Posts: 116
Likes: 0
From:
Old Glory, that's the plan right now. I was getting about 285fps w/ some 415gr X-Cutters with 135gr's upfront for ASA (that produced 75lbs/ft KE), and over 290fps w/ my ACC 3-49 from what I was calculating in TAP. DL = 30" DW = 60lbs
I'm really thinking about shooting the Rocket Hammerhead next year with that set-up.
I'm really thinking about shooting the Rocket Hammerhead next year with that set-up.
#13
ORIGINAL: JoshKeller
2005 Allegiance at 70 lbs + 31"+ 560 grain arrows = enough penetration to go through a Buick!
2005 Allegiance at 70 lbs + 31"+ 560 grain arrows = enough penetration to go through a Buick!
That's exactly what I had behind my target as a back stop, just in case it blew through my block target...

#14
Joined: Jul 2004
Posts: 26
Likes: 0
From: J\'ville Texas
ROFLMAO "That might be the bow for you if you want to kill tanks, or buildings, or entire hillsides or something?" Matt / PA , that was GREAT! LOL !!
Just thought that was darn funny. I needed a good laugh.[8D]
Just thought that was darn funny. I needed a good laugh.[8D]
#15
But for you fellers with arms... Mercy...
Unfortunately no the Allegiance only comes in a 30" top end..........BUT the Old Glory DOES come in a 31" draw length.
It's 37 1/4" ATA Vs the 33 5/8" so really it's only a little over 1" ATA longer on either end, and a bit larger brace height at 7 1/4".......IBO speeds are just a tad behind the Allegiance at 315-323. That might be the bow for you if you want to kill tanks, or buildings, or entire hillsides or something?
It's 37 1/4" ATA Vs the 33 5/8" so really it's only a little over 1" ATA longer on either end, and a bit larger brace height at 7 1/4".......IBO speeds are just a tad behind the Allegiance at 315-323. That might be the bow for you if you want to kill tanks, or buildings, or entire hillsides or something?


What kind of numbers do you think I will get out of an Old Glory at a 31 inch draw length with a 70 lb draw weight flinging 440 grain Bemans?
I haven't figured it out yet but I bet my backstop is going to be crying....Buick or not.
#19
Joined: Feb 2003
Posts: 391
Likes: 0
From: Cincinnati, Ohio
Dang-it, Range! You just had to do that, didn't you? You've done gone & got me pondering now. But I've already bought an '05 bow. You're going to have to explain to my wife why it is that I'll need to get another.
I picked up a Liberty about this time last year & have been very pleased with it and I've been able to resist the excitement surrounding the '05 Bowtechs until now.
I always knew you were trouble.
I picked up a Liberty about this time last year & have been very pleased with it and I've been able to resist the excitement surrounding the '05 Bowtechs until now.
I always knew you were trouble.
#20
Thread Starter
Nontypical Buck
Joined: Feb 2003
Posts: 2,994
Likes: 0
From:
I always knew you were trouble.

That said, your gut told you you were gonna have to have one of these as soon as you heard about them, didn't it... If you need a note for your wife, just say the word


