release question
 

when i am at full draw and use back tension it seems i have to really force my back muscles together to get my release to fire.do i need to shorten my release length or lengthen it to get a smoother more surprise release.i shoot a little bitty goose so i can adj its length either way.was going to shorten it but thought i would get your feed back first

RE: release question
 

set the trigger to where it goes off faster.

RE: release question
 

I've tried two things... pushing the bow toward the target and pulling my release hand away from the target. The second thing I shorten my draw about 1/2" which works better in conjunction with what I stated earlier. Oh yeah, I have my release set pretty stiff, and I concentrate really hard on aiming during the cycle which gives me that "surprise" release. GOOD SHOOTING!!!

RE: release question
 

You might want to shorten it up a smidge, but first consider this. Pulling the shoulder blades together forces many people to pull their bow arm inward also. While the string hand is pulling back, the bow hand winds up moving back with it. So the back tension is never transmitted to the release trigger.

What I recommend you try first, before adjusting your release length, trigger tension or anything else, is to concentrate on pushing your string hand elbow straight back while pushing your pin straight into the center of the target. Do that rather than trying to pull your shoulder blades together. That movement will isolate the muscles on your string side and allow them to move independently of the bow arm back muscles.

RE: release question
 

That's great advise! That's is exactly how I concentrate when practicing form.

RE: release question
 

thanks guys im going to stiffen the trigger a bit and try to concentrate on pushing release elbow back instead of squezzing shoulder blades together and see what happens.